Diesel Forum - All Diesel Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi was hoping to get some input. I am changing out the exhaust on 07 Dodge Ram 3500 6.7. Changing to 5". Was wondering if anyone has made same upgrade and if so did you encounter in issues along the way that might help me in the installation. Any 02 sensor issues etc..? I am looking at the Diamond Eye Exhaust System with the Dynomax Exhaust Tip. Any tips or suggestions? I appreciate any input!
 

·
Registered
Joined
·
1,448 Posts
I wouldn't change out the hole exhaust to 5"
Your low end torque will suffer. just do your tail pipes or tail pipe to 5" with out changing any of your engine's characteristics.
 

·
Premium Member
Joined
·
14 Posts
you have to remove the cross member to get the down pipe out. you can take 2 bolts on the right side and 1 bolt out on left side and let it hinge down while supporting the trans.
 

·
Banned
Joined
·
1,488 Posts
Are you removing the DPF and EGR system? If you do there is where you will see problems, unless you get a good programer or a smarty.
 
1 - 6 of 6 Posts
Top