Diesel Forum - All Diesel Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have a 97 F350 and my pinion bearing just went bad so I replaced all the bearing and seals in my axel. Also replaced ball joint, u-joints and multiple other bearings that came in a kit to rebuild my front end. I had a clunk in my front end when I would turn. After all this its still there? It mostly happens when I turn and also hit a bump. What could this be?
 

·
Registered
Joined
·
1,448 Posts
Welcome to Diesel Forums
 

·
Banned
Joined
·
1,488 Posts
Welcome.
It could mean improper installation. Or another part went bad. IDK.
 

·
Registered
Joined
·
1,837 Posts
does yours have the TTB front end or the solid axle? also this may sound stupid... check your shock mounts on the axle and the frame...
 

·
Registered
Joined
·
935 Posts
You should also check the steer axle rear shackles. On the big trucks i work on i've noticed sometimes a clunk could be caused by worn or loose rear shackles.
 
1 - 5 of 5 Posts
Top