Diesel Forum - All Diesel Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I recently bought a 96 f 350 powerstroke. Strong running truck but when I changed the oil in it this morning I found that it has a banks performance trans command unit tucked in between the frame rails. So I decided to dig a little deeper and found a ts 6 pos chip. Only problem is that the switch is busted off. Not a big deal. They make replacment switches. But a friend has a good switch without the plug for the chip. Can I just unhook the computer and splice his switch into the existing wire. Or would it be best to just order and install the new switch.
 

·
Registered
Joined
·
1,448 Posts
I think if I was you I would order the replacement switch from BANKS. The tuner also needs to know when you have used the switch.
And when you start splicing wires on an aftermarket item, you could potentualy open a hole new can of worms
 
1 - 2 of 2 Posts
Top